Oregon BA2000 - Weather Station Manual

Oregon BA2000 - Weather Station Manual

Advertisement

Oregon BA2000 - Weather Station Manual

OVERVIEW

FRONT VIEW

FRONT VIEW

  1. IR motion sensor
  2. CDS light sensor
  3. Weather forecast
  4. : Clock signal reception indicator
  5. °C / °F
  6. AM / PM
  7. Clock / Indoor Temperature
  8. : Time zone offset

BOTTOM VIEW

BOTTOM VIEW

  1. CLOCK: Change display; Set clock
  2. / Decrease / increase value of the setting; deactivate / activate clock reception signal
  3. °C / °F: Select temperature unit
  4. RESET: Reset unit to default settings
  5. AUTO ON ·OFF: Enable / disable automatic toggle of display
  6. EU / UK: Select the nearest radio signal
  7. Indoor temperature sensor
  8. Adaptor socket

GETTING STARTED

MAIN UNIT INSTALLATION

  • Plug AC/DC adaptor into socket. Make sure the adaptor is not obstructed and is easily accessible to the unit.

To completely disconnect from power, the adaptor should be disconnected from the main unit.

warning NOTE: The main unit and adaptor should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adaptor.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock automatically with a clock signal.

  • EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany.
  • UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England.

To enable / disable signal reception:
Press and hold to enable or to disable signal reception.

warning NOTE: Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG SIGNAL WEAK / NO SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the clock signal reception first.

  1. Press and hold CLOCK.
  2. Press / to change the settings.
  3. Press CLOCK to confirm.

The settings order is: time zone offset, 12/24 hour format, hour, minute.

Time zone offset sets the clock +/- 23 hours from the received clock signal time.

warning NOTE: If you enter +1 in the time offset setting, this will give you your local time plus one hour.

LCD DISPLAY

Toggle clock and indoor temperature display

  • manually:
    Wave your hand up to 3 inches in front of the IR motion sensor (when AUTO ON·OFF is OFF).
  • automatically and continuously:
    Slide AUTO ON·OFF switch to ON.

warning NOTE: The installed CDS light sensor inside the unit will activate automatic display dimming.

WEATHER FORECAST

This product features the next 12-24 hours of weather within a 30-50 km (19-31 mile) radius.

Sunny
Cloudy
Rainy

TEMPERATURE

To toggle temperature unit:
Press °C / °F.

RESET

Press RESET to return to the default settings.

SPECIFICATIONS

TYPE DESCRIPTION
L x W x H

160 x 55 x 160 mm

(6.3 x 2.2 x 6.3 in)

Weight 340 g (12 oz)
Power 9V AC adaptor (included)
Temperature Range

-5°C to 50°C

(23°F to 122°F)

PRECAUTIONS

  • Do not subject the unit to excessive force, shock, dust, temperature or humidity.
  • Do not cover the ventilation holes with any items such as newspapers, curtains etc.
  • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
  • Do not clean the unit with abrasive or corrosive materials.
  • Do not tamper with the unit's internal components. This invalidates the warranty.
  • Only use fresh batteries. Do not mix new and old batteries.
  • Images shown in this manual may differ from the actual display.
  • When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.
  • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.
  • The contents of this manual may not be reproduced without the permission of the manufacturer.
  • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
  • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use.

warning NOTE: The technical specifications for this product and the contents of the user manual are subject to change without notice.

warning NOTE: Features and accessories will not be available in all countries. For more information, please contact your local retailer.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Oregon BA2000 - Weather Station Manual

Advertisement

Need Assistance?

Do you have a question about the BA2000 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents