Denver Electronics TC-22 Instruction Manual

INSTRUCTION MANAUL
TC-22
www.denver-electronics.com

LOCATION OF CONTROL

1. FUNTION SELECTOR
2. VOLUME CONTROL
3. CD DOOR
4. BAND SELECTOR
5. TUNING CONTROL
6. DIAL POINTER
7. OPEN / CLOSE
8. LED DISPLAY

9. PROGRAM

10. SKIP -
11. STOP

12. REPEAT

13. SKIP +
14. PLAY / PAUSE

CD OPERATION

PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1.Press the "PROGRAM" button, the display will show "01" and flash.
2.Select desired track by using the "SKIP + " or "SKIP -" button.
3. Press the "PROGRAM" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed. Press the "PLAY/PAUSE" button to
play the disc in the order you have programmed and the program indicator flashes.
6. Press the "STOP" button twice to teminate programmed play and the program indicator
will turn off.
REPEAT
Press the "REPEAT" button before or during playing CD , a single track or all the tracks
can be repeated.
Each press switches the repeat mode as follows:
1 – REPEAT 1 (The repeat indicator is flashing)