Next 844423 Assembly Instructions

Next 844423 Assembly Instructions

Z shelf

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-
• We suggest you spend a short time reading through this leaflet and then follow the simple step-
by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• One person is required to assemble this product.
• Please note wall plugs & screws are not included, please source suitable fixings for your wall type
• The maximum weight this shelf can hold safely is

PRODUCT INFORMATION

• Made from particle board with a wood effect finish.
• Made in China

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
ASSEMBLY INSTRUCTIONS.
15
kg.
Page 1 of 3
Z SHELF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 844423 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next 844423

  • Page 1 Z SHELF ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS STEP ONE 1.Attach panels 1 & 2 to panel 3 with 4 x screws (B) through and tighten with an Allen key( C). Page 2 of 3...
  • Page 3 5.Carefully lift the shelf into position ensuring that the fixings attached to the shelf are firmly hooked over the exposed screws. 6.Check shelves periodically to see that no fittings has loosened and needs attention. Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Page 3 of 3...

Table of Contents