Philips S1334/41 Manual page 33

4 Remove the shaving heads from the shaving
5 Place new shaving heads in the shaving unit.
1 6 Put the retaining frame back into the shaving
2
7 Insert the hinge of the shaving unit into the slot
unit.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
Note: Make sure that the shaving heads with
the projections fit exactly onto the hooks of the
shaving head holder when placing them. The
shaving heads supplied with the shaver either
have notches or projections. Both shaving
systems are the same.
unit (1) and turn the lock clockwise (2).
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
32
English