Advertisement
Available languages
Available languages
STANDARD REMOTE CONTROL
The remote control is taught-in as standard from factory setting and does not have to be registered on the transformer. Insert the supplied batteries into the remote
control, which is now ready for use. Below you will find the functions of the remote control.
COMPATIBLE WITH
REMOTE CONTROLS
Remote control 2 channel, SKU: 5422294
Remote control 4 channel, SKU: ITL-R-4
WALL DIMMERS
Wall panel, SKU: 5422300
Wall panel, SKU: ITL2.4GMD
1. SET - Pairing with driver
2. ON - Turn on
3. OFF - Turn off
4. Brightness (+) - Gradually increase brightness
5. Brightness (-) - Gradually decrease brightness
6. Step Brightness (+) - Brightness in steps 10%, 30%, 70%, 100%
7. Step Brightness (-) - Brightness in steps 10%, 30%, 70%, 100%
8. Mode - Brightness 100%
9. Night light - Brightness 10%
10. DIY1/DIY2 - Congure DIY modus
11. Delay - Turn off after 30 seconds
Pairing Remote Control
1.
Disconnect the power of the driver
2.
Press and hold the SET button
3.
Connect power to the driver
Release the SET button as soon as the lights flicker
4.
5.
Press the Mode button 4 times repeatedly
EN
Advertisement
