Advertisement
Quick Links
Advertisement
Related Manuals for Lighttoys Boom products V2
Summary of Contents for Lighttoys Boom products V2
- Page 1 Boom products V2 user manual LIGHTTOYS WWW.
- Page 2 Introduction Congratulation! You have just received your new Pyro- terra Lighttoys Boom device, designed for safe use of your purchased pyrotechnic effect (PE) during fire per- formances. Please take a brief moment to read the following in- structions in order to ensure safe and trouble-free use.
-
Page 3: Safety First
Safety first! Whenever using Pyroterra Lighttoys Boom products always follow these basic safety rules: 1) Never leave a loaded Boom device unat- tended. 2) The person responsible for the control and fir- ing of pyrotechnics must ensure that it is safe to do so. -
Page 4: Proper Use
Proper use In order to use Boom devices you need to purchase a pyrotechnics effect (PE). We recommend stage effects called: gerbs or silver fountains. To obtain suitable PE we suggest contacting your local pyrotechnic resellers, or search for suppliers on the in- ternet. - Page 5 How to attach PE to Boom device 1) Remove any paper or plastic wrap from PE, in order to prevent the PE from getting loose during spinning. 2) Firmly attach the PE to the end of the Boom device using strong adhesive tape (i.e. duct tape).
- Page 6 The status LED should shine in red color. If not, the ignitor in the PE is faulty and the PE must be replaced. Switch off the main switch after the test is over. Note: To open the terminal, press on the plastic tabs lightly.
- Page 7 2-3 months, even if the device is not used. It’s also good practice to charge before every major show. The older Boom device V1 is charged via a proprie- tary Lighttoys charger with a 3.5mm jack connector. Maintenance Periodically clean the terminal contacts mechanically to protect them from chemical corrosion and pyro- technic residue.
-
Page 8: Warranty And Service
You can also contact us via email at: eshop@pyroterra.cz Disclaimer Usage of any of Pyroterra Lighttoys Boom products is entirely at your own risk and Pyroterra Lighttoys do not take any responsibility or liability for any potential accidents, injury or damage. - Page 9 Products BOOM POI V2 Specially designed for pyro effect during poi spinning. Used as a pair, each Boom Poi has one PE attached. Weight: 122g (4.3oz) / 1 piece Length: 28cm (11.0in) No. of ignitions: Up to 30 ignitions Charging time: 1 hour / 1 piece Battery: Li-ion 3.7V...
- Page 10 Weight: 234g (8.3oz) Length: 100cm (39.4in) No. of ignitions: Up to 30 ignitions Charging time: 1 hour Battery: Li-ion 3.7V BOOM FANS V2 Specially designed for greatest pyro output. You can attach up to five pieces of pyrotechnics on one fan. Weight: 380g (13.4oz) / 1 piece Length of rod:...
- Page 11 No. of ignitions: Up to 15 ignitions Charging time: 1 hour / 1 piece Battery: Li-ion 3.7V BOOM DRAGON STAFF V2 Specially designed for pyro effect during contact staff spinning. 3 pieces of PE are attached on each end of the staff.
- Page 12 CE- Norms. The Boom products are powered by extra low voltage (ELV), and meets the requirements set by DIN EN 61140 (VDE 0140-1) Safety class III. Team Pyroterra Lighttoys wishes you many hours of spinning enjoyment...
Need help?
Do you have a question about the Boom products V2 and is the answer not in the manual?
Questions and answers