Related Manuals for MAEN HUDSON 38
Summary of Contents for MAEN HUDSON 38
- Page 2 ABOUT THE HUDSON 38 GMT CERTIFIED SWISS MADE USING YOUR WATCH Before being worn for the first time, or if it has stopped, a MAEN watch must be wound manually in order to function correctly and precisely. To wind the watch man- OVERVIEW ually, unscrew the winding crown completely, then turn it several times clockwise.
- Page 3 The Hudson 38 GMT The Hudson 38 GMT is based on our flagship model, the Hudson 38 MK4, and shares all the improvements of this fourth generation. With its 30 ATM water resistance, X1 Superluminova, GMT function and screw-down crown the Hudson GMT is the perfect travel companion.
- Page 4 Certified Swiss Made The Hudson 38 GMT is assembled in La Chaux-de-Fonds, Switzerland. Waterproof testing, entrance inspection and final quality control is also performed in Switzerland. The Swiss Made label is a representation of the ultimate sign of quality - the perfect...
- Page 5 Hudson 38 GMT Overview HOUR HAND DATE WINDOW MINUTE HAND SECONDS HAND GMT HAND WINDING CROWN...
- Page 6 Setting your Hudson 38 GMT SCREWED-DOWN POSITION (POSITION 0): MANUAL WINDING (POSITION 1): UNSCREW THEN PULL OUT the crown is completely screwed down The crown is unscrewed. To wind the against the case. When the crown watch manually, turn the crown is in this position, the Hudson GMT clockwise;...
- Page 7 Setting the date & GMT hand SETTING THE DATE (POSITION 2): SETTING THE TIME (POSITION 3): the crown is unscrewed and pulled out the crown is unscrewed and pulled out to the to the first notch. To set the date, turn the second notch.
- Page 8 Finally, write ‘reclaim of purchase’ as subject of the e-mail and mail. Note that repair/replacements will be charged in the fol- Caring for you Hudson 38 GMT lowing cases, even during the warranty term.
- Page 9 WWW.MAENWATCHES.COM...
Need help?
Do you have a question about the HUDSON 38 and is the answer not in the manual?
Questions and answers