Samsung VS28C97 Series User Manual page 16

Operation
Setting and canceling the network connection
• Refer to the 'SmartThings app' section for network connection settings. To cancel the network
connection after entering the AP mode, press and hold the Auto Empty button for 5 seconds.
Resetting the network connection
• If the network connection continues to fail, press and hold the Auto Empty button for 5 seconds to
enter AP mode. Then, press and hold the Auto Empty button for at least 10 seconds to reset the network
connection settings.
- The AP mode will be canceled.
Allowing or blocking the network connection
• To allow or block Wi-Fi, press and hold the Auto Empty button for at least 15 seconds until the Auto
Empty LED and Wi-Fi LED blink simultaneously.
Factory reset
• We recommend performing a factory reset to protect your privacy data if you are going sell this product
as a used good. Press and hold the Auto Empty button for 5 seconds to enter AP mode. Then, press and
hold the Auto Empty button for at least 15 seconds.
- The AP mode will be canceled and the network setting will reset.
16 English