Adjusting The Handle Height - Toro Recycler 20013 Operator's Manual

Adjusting the Handle Height

To adjust the handle
height, squeeze the
bottom of the handle
halves together (as
shown) and change the
handle holes in which the
pins (A) are mounted, as
follows:
Raise the handle
using hole (B).
Lower the handle
using hole (C).
Installing/Removing the
Grass Bag
1. Open the rear door.
2. Remove the rear
discharge plug.
3. Install the bag over the door rod.
4. To remove the bag, reverse the steps above.
Warning
To avoid personal injury, never recycle the grass
without the rear discharge plug in place.
6
C
B
A
m-5586
m-5587
m-5588
3328-274
m-5614
Installing/Removing the
Side Discharge Chute
1. Lift up the lock on
the side discharge door.
2. Lift open the side
discharge door.
3. Install the side discharge chute and close the
door onto the chute.
4. To remove the side
discharge chute, reverse
the steps above.
Important: Push down
on the lock after you
close the side discharge
door.
m-5612
m-5583
m-5584
m-5585
m-5676