Advertisement
Device Application Notes For NetVault
Automated Tape Subsystem:
Key Features
•
Tape Slots: 8
•
Tape Drives: 1
•
Tape Drives Supported
CERTANCE ULTRIUM 2 (Viper 400 LTO-2)
o
•
Supported Media
LTO Ultrium-1 Tape
o
LTO Ultrium-2 Tape
o
LTO Cleaning Cartridge
o
•
Bar Code Reader: Supported (Optional)
Type: Standard
o
•
Tape Import/Export Slot: None (Front Door Only)
•
Interface
SCSI LVD
o
•
Additional Features
Rackmount ready
o
NetVault Software:
Minimum Release Required
•
Version 6 Release:
V653_R021217
o
Additional Software Required
•
Device Template(s):
CLL3202.npk (cll3200.tpl)
o
SEALT01.npk (viper200.tpl)
o
BakBone Software, Inc.
Application Notes
Product: CERTANCE CLL3200 LTO-2 Loader
Firmware Revision: S40r
Drive: CERTANCE ULTRIUM 2
Drive Firmware Revision: 155A
Interface: SCSI LVD
CERTANCE CLL3200 LTO-2 Loader
(CERTANCE LTO2 LDRCLL3200)
1
Revision A7
11/3/2003
Advertisement
Table of Contents
Summary of Contents for BakBone Software LTO 2
- Page 1 Device Application Notes For NetVault Automated Tape Subsystem: Key Features • Tape Slots: 8 • Tape Drives: 1 • Tape Drives Supported CERTANCE ULTRIUM 2 (Viper 400 LTO-2) • Supported Media LTO Ultrium-1 Tape LTO Ultrium-2 Tape LTO Cleaning Cartridge •...
- Page 2 Device Application Notes For NetVault Attention : Device Template Installation available through the use of standard package installation procedures. Refer to the following for details. Installation: Prerequisites Ensure Termination is configured correctly by using the Manufacturer User’s Guide for reference. Attach Device to system by using the Manufacturer’s Installation Guide for reference.
- Page 3 Device Application Notes For NetVault Selection of Device within NetVault Library Robotic Arm Selection Select the Device Management Facilities. Select to Add a Library. Select Server machine and open it to view attached Robotic Libraries in “Library Selection” tab. Select Library arm under Library Selection (Refer to Figure 1) and verify the correct device is displayed in the Selected Library area on the right.
- Page 4 Device Application Notes For NetVault Drive Selection Select the Drive Selection tab. Select Server machine and open it to view the attached SCSI tape drive. Add the drive by selecting the drive and verify the correct device is displayed in the Selected Drives area on the right.
- Page 5 Device Application Notes For NetVault Configuration (for Optimum Performance) Select the Configure tab, right-click the drive and select Configure, to display the Configure Device dialog box. (Refer to Figure 3 on next page.) Click the Configuration tab in the dialog box and increase the Media block size (Kb) from the default setting of 32 Kb.
- Page 6 Device Application Notes For NetVault Revision A7 Figure 3. Drive Performance Tuning BakBone Software, Inc. 11/3/2003...
- Page 7 Device Application Notes For NetVault Other information Known Firmware Issues: None. Device Notes: When importing/exporting tapes through the front door, once complete, you must exit (cancel) all the way out of the front panel menus for the loader to re-inventory and return to an ONLINE state. Otherwise, when issuing the “close door”...
Need help?
Do you have a question about the LTO 2 and is the answer not in the manual?
Questions and answers