Advertisement
6 Disassembly and Assembly Instructions
For assembly, refer to the Assembly Instructions, and perform the procedures in the opposite order of disassembly.
6.1.
Detach motor housing(right)
1. Turn the locking knob counterclockwise to remove it.
2. Lay the grinder with its left side down.
3. Remove the four pan head tapping screws and detach motor housing (right) from motor housing (left).
4. Detach housing cover from the motor housing(left).
6.2.
Disconnecting the power cord and switch
1. Lift the A.C. motor (with gear case and cover) and disconnect the lead wire terminal.
2. Pull and disconnect the power cord terminal out of the switch.
3. Disconnect the lead wire terminal from the switch.
4. Remove the two switch lock screws and take out the switch.
11
Advertisement
