Bissell POWERFORCE HELIX 1700R User Manual page 9

Maintenance:
1
Unplug vacuum, turn over and
unscrew Philips head screws
to remove bottom cover.
Maintenance:
1
Remove the hose
from the back of the
vacuum by twisting
it to the left. Remove
any debris that may
have gotten clogged.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
Replace the Brush & Belt
2
Lift roller straight
out. If the belt is not
broken, remove roller
from inside of the
looped belt.
Clearing a Clog
2
air path
Check the foot hose on
the back of your vacuum
down towards the bottom.
If necessary, remove the
screw from the foot hose
and check for clogs.
3
Replace the brush roll and
belt by looping the belt over
the motor shaft and the brush
roll. Line up the end caps
and pull the brush forward
into place. This will stretch
the belt. Once the brush roll
is installed, place the bottom
cover back on and replace
the screws.
3
screw
Check the air passageway on
the bottom of your vacuum.
Remove the bottom cover and
the brush. Remove any debris.
www.BISSELL.com
9