wad Intius TW002 User Manual page 5

Use of the cutting machine
Before using the machine, put a few drops of
1
lubricating oil on the blades.
Cutting with 4 measures
You can use the machine to cut without a comb or you can use one of the 3 combs with 1, 2 and 3 mm sizes.
To adjust the hair size, just select the right comb.
1 mm
8
Press the power button to start the blades.
2
Pass the machine over the desired cutting area.
3
Press the off button when you have finished
4
the job.
2 mm 3 mm
Adjusting the blades and combs
To install the combs:
· Align the edge of the comb with the edge of the blade (1) and push
forward slightly to assemble (2).
To dismantle the combs:
· Simply pull the comb tightly from point (2).
In both cases always make sure that the machine is switched off.
Removal and installation of the blades
Removal of the blades:
Remove the screws with a screwdriver;
1
loosen and remove the cutting head.
1 2
To prevent the blades from falling, use the
2
other hand to hold them.
9