Section 3 - Configuration
You can then set up wireless security for the network.
If you select WEP as the security option, the following
settings below will appear.
Authentication
Select the authentication type.
Type:
Encryption
Select the encryption strength.
Strength:
Security
Select up to four WEP keys.
Encryption
(WEP) Key:
If you have selected any WPA option, the following setting will appear.
Pre-shared
Enter a pre-shared key.
Key:
Click the Apply button to save any changes made. You will be taken to the next page.
You can then set up wireless security for the network.
IP Address:
Enter the IP address.
Subnet Mask:
Enter the subnet mask.
Click the Finish button to save the configuration.
D-Link DIR-615 User Manual
DIR-615
DIR-615
39