Using The Projector; Connecting The Antenna Or Cable - LG CineBeam HF65LA Owner's Manual

32
USING THE PROJECTOR
Connecting the Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog, digital) TV. (The RF cable is sold
separately.)
NOTE
• Make sure not to bend the copper wire of the
RF cable (75 Ω). Turn the input jack to the
right to fasten it.
• Ensure you use a standard coaxial cable (75
Ω, sold separately) when connecting to the
projector input.
•
For better image quality in locations where
signal strength is low, purchase and install a
signal amplifier (booster).
•
A signal splitter is required if you want to use two or more projectors through
one antenna.
•
If you have any problems when installing the antenna, please consult a suitable
retailer or the store where you purchased the antenna.
Copper wire