StarTech.com FTRST2 Quick Start Manual

Rocking Under-Desk Footrest - Cable Management
Product Diagram (FTRST2)
2
Part
1 • Rest feet on the Footrest Platform
Footrest Platform
• Store a Single Strip UL-Certified Power Bar
Cable Management
2
Storage Space
• Feed Cables out of cutouts in the back and sides
• Curved design to allow for a back and forth
3
Base
movement
Warnings
• Always use dry footwear.
• Always store wet footwear and open containers of liquid away from the Rocking
Under-Desk Footrest.
• Do not stand on the Rocking Under-Desk Footrest.
Requirements
For the latest requirements please visit: www.startech.com/FTRST2.
• (Optional) Single Strip UL-Certified Power Bar x 1
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
1
3
Function
(Optional) Installation
1. Ensure the Single Strip UL-Certified Power Bar is powered Off.
2. Access the Cable Management Storage Space by unfolding the Footrest Platform
from the Base.
3. Apply the 20 x 40 mm Tape to one side of the Single Strip UL-Certified Power Bar.
4. Press the taped side of the Single Strip UL-Certified Power Bar into the Cable
Management Storage Space with the Outlets pointed towards the front and the
Cable from the Single Strip UL-Certified Power Bar routed out of the side.
5. Route the Cables through the gap at the front and into the Single Strip UL-
Certified Power Bar and plug the Cables into the Outlets. (Figure 1)
Figure 1
6. Power On the Single Strip UL-Certified Power Bar.
7. Fold the Footrest Platform over the Base.
Note: Exercise caution when folding to avoid damaging the Cables.
8. Place the Rocking Under-Desk Footrest under the Desk.
Quick-Start Guide
Manual Revision: October 30, 2019