Using Your Kettle - Toshiba KT-17SHNH User Manual

USING YOUR KETTLE

the switch down to switch the kettle on.
The power switch will illuminate showing the kettle is in operation.
When the water has reached the correct temperature, the power
switch will switch off.
You can stop the boiling at any time by lifting the switch up. To
re-boil, press the switch again. If the water is very hot, it may
be necessary to wait until the switch resets.
Always ensure the lid is tightly fitted and never lift it while the
kettle is boiling or you run the risk of scalding. If the lid is not
correctly fitted while boiling, the automatic cut-out will not
operate, you may boil the kettle dry and cause damage due to
excessive steam emissions.
After boiling, switch off the appliance at the mains. The kettle
now could be safely removed from its base and pour out the
boiled water. Always pour boiling water slowly and carefully
without tipping the kettle too quickly.
Never leave hot water in the kettle while it is unattended.
After use, replace the kettle on its base.
Before first use or after storage:
Fill the kettle with fresh water. Boil the water. Pour away the
boiled water. Repeat this two or three times. The kettle is now
ready for use.
6