Download Print this page

Qlogic QMI3472 Datasheet page 2

Dual port 4-gbps fibre channel (fc) & 1-gbps ethernet cffh expansion card for ibm bladecenter

Advertisement

SANblade QMI3472
Host Bus Interface Specifications
Bus interface
Dual PCI Express x4
Memory
Integrated 512KB SRAM per port
1-MB flash and 128-KB flash (SPI)
2-KB NVRAM (SPI)
4-KB EEPROM (I
C)
2
Hardware platforms
IBM HS21
IBM LS21
IBM LS41
Compliance
PCI Express Base Specification , revision 1.0a
PCI Bus Power Management Interface
Specification, revision 1.1
Fibre Channel Specifications
Data rate
4/2/1 Gbps auto-negotiation
(4.25/2.125/1.0625 Gbps)
Performance
150,000 IOPS per port
Topology
Point-to-point (N_Port)
Arbitrated loop (NL_Port)
Switched fabric (N_Port)
Logins
Support for F_Port and FL_Port login
2,048 concurrent logins and 2,048 active
exchanges per port
Protocols
FCP (SCSI-FCP)
FC-TAPE (FCP-2)
Compliance
SCSI-3 Fibre Channel Protocol
(SCSI-FCP)
Fibre Channel Physical and Signaling Interface
(FC-PH)
Fibre Channel 2nd Generation (FC-PH-2)
Third Generation Fibre Channel Physical and
Signaling Interface (FC-PH-3)
Corporate Headquarters
Europe Headquarters
© 2007 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, QLA, and SANblade are registered trademarks of QLogic Corporation. SANtrack is a trademark of QLogic Corporation,
which may be registered in some jurisdictions. Broadcom is a registered trademark of Broadcom Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation
is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.
CU0258002-00 A 07/07
Fibre Channel-Arbitrated Loop (FC-AL-2)
Fibre Channel Fabric Loop Attachment Technical
Report (FC-FLA)
Fibre Channel-Private Loop Direct Attach
Technical Report (FC-PLDA)
Fibre Channel Tape (FC-TAPE) profile
SCSI Fibre Channel Protocol-2 (FCP-2)
Second Generation FC Generic Services (FC-
GS-3)
Third Generation FC Generic Services (FC-GS-3)
Fibre Channel Framing and Signaling (FC-FS)
Ethernet Specifications
Data rate
1-Gbps full-duplex per port
Topology
Any Ethernet network
Physical Specifications
Ports
Dual 4-Gbps FC & dual 1-Gbps Ethernet
Form factor
IBM Combo Form Factor (CFFh)
Environment and Equipment
Specifications
Airflow
No airflow required
Temperature
Operating: 0°C/32°F to 55°C/131°F
Storage: -40°C/-40°F to 70°C/158°F
Humidity
Relative (non-condensing): 5% to 95%
Storage: 5% to 95%
Power dissipation
6.8W (maximum)
QLogic Corporation
26650 Aliso Viejo Parkway
QLogic (UK) LTD.
Surrey Technology Centre
Tools and Utilities
Management tools
SANsurfer FC HBA Manager
SANsurfer FC HBA Command Line Interface (CLI)
Broadcom Advanced Control Suite (BACS)
Device utilities
FLASUTIL for updating:
Firmware
Boot code
HBA parameters
Boot support
BIOS
FCode
PXE Ethernet Boot
APIs
SNIA HBA API V2
SMI-S
FDMI
Operating systems
Windows
Linux – Red Hat
Linux – SuSE
NetWare
Solaris
VMware
Ordering Information
The QMI3472 is available from IBM
(IBM part number: 39Y9306)
Aliso Viejo, CA 92656
949.389.6000
40 Occam Road Guildford
Surrey GU2 7YG UK
D A T A S H E E T
www.qlogic.com
+44 (0)1483 295825

Advertisement

loading

This manual is also suitable for:

Sanblade qmi3472