Download Print this page

Qlogic QMC2462S Datasheet page 2

Dual port 4-gbps fibre channel (fc) small form factor (sff) expansion card for ibm bladecenter

Advertisement

SANblade QMC2462S
Host Bus Interface Specifications
Bus interface
64-bit, 133-MHz PCI-X
Memory
1-MB SRAM per port
1-MB flash (SPI)
2-KB NVRAM (SPI)
4-KB EEPROM (I
C)
2
Hardware platforms
IBM HS20
IBM HS21
IBM LS20
IBM LS21
IBM LS41
IBM JS21
Compliance
PCI-X Protocol Addendum to the PCI Local Bus
Specification , revision 2.0a
PCI Bus Power Management Interface
Specification, revision 1.1
Fibre Channel Specifications
Data rate
4/2/1 Gbps auto-negotiation
(4.25/2.125/1.0625 Gbps)
Performance
150,000 IOPS per port
Topology
Point-to-point (N_Port)
Arbitrated loop (NL_Port)
Switched fabric (N_Port)
Logins
Support for F_Port and FL_Port login
2,048 concurrent logins and 2,048 active
exchanges per port
Corporate Headquarters
Europe Headquarters
© 2007 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, QLA, and SANblade are registered trademarks of QLogic Corporation. BladeCenter is a registered trademark of IBM
Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any
errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.
CU0258004-00 A 07/07
Protocols
FCP (SCSI-FCP)
FC-TAPE (FCP-2)
Compliance
SCSI-3 Fibre Channel Protocol
(SCSI-FCP)
Fibre Channel Physical and Signaling Interface
(FC-PH)
Fibre Channel Physical and Signaling Interface
2nd Generation (FC-PH-2)
Third Generation Fibre Channel Physical and
Signaling Interface (FC-PH-3)
Fibre Channel-Arbitrated Loop (FC-AL-2)
Fibre Channel Fabric Loop Attachment Technical
Report (FC-FLA)
Fibre Channel-Private Loop Direct Attach
Technical Report (FC-PLDA)
Fibre Channel Tape (FC-TAPE) profile
SCSI Fibre Channel Protocol-2 (FCP-2)
Second Generation FC Generic Services (FC-
GS-3)
Third Generation FC Generic Services (FC-GS-3)
Fibre Channel Framing and Signaling (FC-FS)
Physical Specifications
Ports
Dual 4-Gbps FC
Form factor
IBM Small Form Factor (SFF)
Environment and Equipment
Specifications
Airflow
No airflow required
Temperature
Operating: 0°C/32°F to 55°C/131°F
Storage: -40°C/-40°F to 70°C/158°F
QLogic Corporation
26650 Aliso Viejo Parkway
QLogic (UK) LTD.
Surrey Technology Centre
Humidity
Relative (non-condensing): 5% to 95%
Storage: 5% to 95%
Power dissipation
5.6W (maximum)
Tools and Utilities
Management tools
SANsurfer FC HBA Manager
SANsurfer FC HBA Command Line Interface (CLI)
Device utilities
FLASUTIL for updating:
Firmware
Boot code
HBA parameters
Boot support
BIOS
FCode
APIs
SNIA HBA API V2
SMI-S
FDMI
Operating systems
Windows
Linux – Red Hat
Linux – SuSE
NetWare
Solaris
VMware
AIX (IBM supplied driver)
Ordering Information
The QMC2462S is available from IBM
(IBM part number: 26R0890)
Aliso Viejo, CA 92656
949.389.6000
40 Occam Road Guildford
Surrey GU2 7YG UK
D A T A S H E E T
www.qlogic.com
+44 (0)1483 295825

Advertisement

loading

This manual is also suitable for:

Sanblade qmc2462s