Table of Contents
Advertisement
Quick Links
Model No: PT-1305
INSTRUCTION MANUAL
Contain:
◎ Technical Data
◎ Important safety rules
◎ Operating Instructions
◎ Maintenance
◎ Parts List
1/2" Air Impact Wrench
IMPORTANT：
Upon receipt of the product,
read and follow all safety rules,
operating instructions before first use it.
And retain this manual for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Princess auto PT-1305
Summary of Contents for Princess auto PT-1305
- Page 1 1/2” Air Impact Wrench Model No: PT-1305 INSTRUCTION MANUAL IMPORTANT： Upon receipt of the product, read and follow all safety rules, operating instructions before first use it. And retain this manual for future reference. Contain: ◎ Technical Data ◎ Important safety rules ◎...
-
Page 2: Technical Data
※ Technical Data Square drive………………………………………………………………………………………1/2”(13mm) Free speed……………………………………………………………………………………………8,000rpm Max torque…………………………………………………………………………………1,150ft/lb(15,00N.m) Avg. air consumption…………………………………………….……………………………6.5cfm(142L/min) Operating pressure………………………………………………………………………………90psi(6.3bar) Air inlet size………………………………………………………………………………………………1/4” Weight………………………………………………………………………………………………4.4Lbs(2kgs) ※ Important Safety Rules Follow all workshop safety rules, regulations, and conditions when using wrench. Do not wear watches, rings bracelets or loose clothing when using air tools. WARNING! Disconnect from air supply before changing accessories or servicing. - Page 3 designed for removing and installing nuts and bolts. Also ideal for tire changing and general assembling work and other workshop applications. Projectile hazards Failure of the workpiece, of accessories or even of the inserted tool itself can generate high-velocity projectiles. Always wear impact-resistant eye protection during the operation of the assembly power tool for threaded fasteners.
-
Page 4: Workplace Hazards
Do not touch sockets or accessories during impacting, as this increases the risk of cuts, bums or vibration injuries. Use only sizes and types of accessories and consumables that are recommended by the assembly pneumatic tool for threaded fasteners manufacturer. Use only impact-wrench-rated sockets in good condition, as poor condition or hand sockets and accessories used with impact wrenches can shatter and become a projectile. -
Page 5: Troubleshooting
DO NOT use worn, or damaged sockets. Loss of power or erratic action may be due to the following: a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or type of hose connectors. To remedy check the air supply and follow instructions . b) Grit or gum deposits in the wrench may also reduce performance. -
Page 6: Vibration Hazards
Vibration hazards Exposure to vibration can cause disabling damage to the nerves and blood supply of the hands and arms. Keep the hands away from the nutrunner sockets. Wear warm clothing when working in cold conditions and keep your hands warm and dry. If you experience numbness, tingling, pain or whitening of the skin in your fingers or hands, stop using the assembly pneumatic tool for threaded fasteners, tell your employer and consult a physician. -
Page 7: Loading And Operation
holding the throttle open approximately 30 seconds. The lubricator is properly set when a light stain of oil collects on the paper. Excessive amounts of oil should be avoided. In the event that it becomes necessary to store the tool for an extended period of time (overnight, weekend, etc.), it should receive a generous amount of lubrication at that time. -
Page 8: Explosive View
Explosive view Spare part list Description Description Description Description Housing cover Front cover Housing Front pad Rotor Bolt M5 x90 Front gasket Rotor blade Steel ball Intake valve seat Anvil Bushing Pin 4x46 Spring O-ring Anvil bushing Cylinder Reversing button O-ring O-ring Rear cover...
Need help?
Do you have a question about the PT-1305 and is the answer not in the manual?
Questions and answers