C13 Abs Brakes And Anti-Charge Control Setting - EBO KT-LCD3 User Manual

C13 ABS Brakes and Anti-Charge Control Setting

The C13 Parameter setting will display on the LCD after C12 settings. The KT-LCD3 will
display as follows:
C13 Parameters are settings for the ABS braking strength and anti-charge control. Refer
to the following table for definitions of each C13 value.
C13 Value
0
1 Class 1 Braking Strength
2 Class 2 Braking Strength
3 Class 3 Braking Strength
4 Class 4 Braking Strength
5 Class 5 Braking Strength
The recommended value for the C13 Parameter is 1. Other options should be selected
with caution for use. Seek professional advice for assistance.
Be sure to note: the higher the braking intensity level, the higher the braking strength will
be which results in greater damage to the motor shaft.
C13 Display
ABS Braking Strength
None
Energy Recovery Efficiency
None
Best energy recovery
General energy recovery
Weaker energy recovery
Poor energy recovery
Bad energy recovery
29