Advertisement
Quick Links
Illusions 2.0 Hutch Instructions
1. Place each hutch into position on top of
leveled base cabinets.
3. Locate partially predrilled holes on end
panels. Use a 5/16" drill bit to drill (4) holes
through end panels of hutches to be joined.
2. Align hutches and then clamp them together
to keep them in position for the remaining
steps.
4. Insert supplied connector bolts through
drilled holes to connect hutches.
950780-INST
Rev. A
Page 1 of 2
Advertisement
Summary of Contents for Fleetwood Illusions 2.0
- Page 1 950780-INST Illusions 2.0 Hutch Instructions Rev. A 1. Place each hutch into position on top of 2. Align hutches and then clamp them together leveled base cabinets. to keep them in position for the remaining steps. 3. Locate partially predrilled holes on end 4.
- Page 2 950780-INST Illusions 2.0 Hutch Instructions Rev. A 5. With hutches in position, use a 9/64" drill bit 6. Attach hutches to base cabinets using (8) #10 to drill into the base cabinet top through the x .750" flathead wood screws. Tighten to a holes in the hutch plates.