Advertisement
4.0
SAFETY INSTRUCTIONS
4.1
KNOW THE RULES & YOUR EQUIPMENT.
Most job sites have rules governing equipment use & maintenance.
Before starting at a new work location, check with the supervisor or
safety coordinator. Ask about any rules or regulations you need to
abide.
Do not operate this equipment unless you have read the operations and
maintenance manual carefully.
4.2
RECEIVE PROPER TRAINING.
Do not operate this machine unless you have received operational and
maintenance training from a U.S. SAWS representative or from an autho-
rized distributor for U.S.SAWS.
4.3
PROTECT YOUR FEET.
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved foot protection.
4.4
PROTECT YOUR EYES.
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved safety glasses.
4.5
PROTECT YOUR HEARING.
Observe all applicable local, state and federal safety regulations. Wear
OSHA approved hearing protection.
4.6
DRESS PROPERLY.
Do not wear loose clothing or jewelry that can be caught in moving parts.
Wear protective hair covering to contain long hair. Keep hair away from
motor air vent. Rubber gloves and non-skid footwear are recommended
when working outdoors.
4.7
AVOID A DANGEROUS ENVIRONMENT.
Do not expose machine to rain. Do not use machine in wet conditions.
Water entering a power tool will increase the risk of electric shock. Keep
work area well lit.
4.8
AVOID ANY AREAS OR ACTIONS THAT EXPOSE YOU TO CAR-
BON MONOXIDE.
Exhaust gas from gasoline engines contains dangerous carbon monox-
ide. Breathing it can cause unconsciousness and even kill you. Always
operate gasoline engine machines in a well-ventilated area. Do not
operate in areas where exhaust fumes could accumulate without wear-
ing appropriate respiratory protection. Consult your employer and OSHA
regarding use of appropriate respirator for dangerous carbon monoxide
gases.
4.9
KEEP WORK AREA CLEAN. DO NOT RUN OVER ANYTHING.
Loose objects could be thrown from crack. Make sure area to be cut is
clear from people and any loose objects, nuts, bolts, etc. Never run over
any loose objects.
4.10
KEEP CHILDREN AND VISITORS AWAY.
Do not let children or visitors contact machine or extension cord. Keep
children and visitors away from the work area.
4.11
DO NOT OVERREACH.
Keep proper footing and balance at all times.
4.12
MAINTAIN EQUIPMENT WITH CARE.
Keep machine clean and follow maintenance procedures for better
and safer performance. Keep handles dry, clean, and free from oil and
grease. Follow instructions for lubricating and changing accessories.
4.13
REMOVE ADJUSTING TOOLS.
Form a habit of checking to see that tools such as adjusting wrenches
are removed from the machine and properly stored before starting the
engine.
S A F E T Y I N S T R U C T I O N S
Waterworks
Division
4.14
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate machine
when you are tired or fatigued.
4.15
DO NOT USE DRUGS, ALCOHOL, MEDICATION.
Do not operate machine while under the influence of drugs, alcohol,
or any medication.
4.16
KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS.
Do not operate machine with parts missing or improperly mounted.
4.17
CHECK DAMAGED PARTS.
Verify all machine guards are in good condition and will function properly
before using the machine. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other conditions that
may affect machine operation.
4.18
WHEN REPLACING A PART, USE THE SAME TYPE
AND QUALITY.
When replacing a component part with a new one, use only the same type
and quality of new part. Never attempt to repair a machine if you are unfa-
miliar with proper procedures and techniques required.
4.19
LOAD AND UNLOAD SAFELY.
Use proper heavy lifting procedures. Read & understand manuals before
loading & unloading.
4.20
SAVE THESE INSTRUCTIONS.
Refer to this operations and maintenance manual as well as any additional
instructions included from other manufacturers and organizations such as
Honda® and the Masonry and Concrete Saw Manufacturers Institute®.
Never permit anyone to operate the machine without proper instructions.
P: 866 - 987-7297 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
4
Advertisement
