Using The Projector; Connecting The Antenna Or Cable - LG CineBeam Laser HF80JA Owner's Manual

USING THE PROJECTOR

Connecting the Antenna or Cable

To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the Projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog, digital) TV. (The RF cable is sold
separately.)
NOTE
Make sure not to bend the copper wire of the RF
•
cable (75 Ω). Turn the input jack to the right to
fasten it.
Ensure you use a standard coaxial cable (75
•
Ω, sold separately) when connecting to the
projector input.
For better image quality in locations where signal
•
strength is low, purchase and install a signal
amplifier (booster).
A signal splitter is required if you want to use two or more projectors
•
through one antenna.
If you have any problems when installing the antenna, please consult a
•
suitable retailer or the store where you purchased the antenna.
31
Copper wire