Visiopark 1 - Visiopark 2 - PEUGEOT 3008 2015 Handbook

Driving

Visiopark 1 - Visiopark 2

With the engine running, these systems allow
two views of your vehicle's close surroundings
to be displayed on the touch screen using one
camera for Visiopark 1, and two cameras for
Visiopark 2.
224
The screen is divided into two parts: on the
left, a contextual view; on the right, a view from
above the vehicle.
The parking sensors complete the information
on the view from above the vehicle.
Different contextual views can be displayed in
the left-hand part:
- standard view,
- 180° view,
- zoom view
AUTO mode is activated by default.
In this mode, the system chooses the best view
to display (standard or zoom) according to the
information from the parking sensors.
You can change the type of view at any time
during a manoeuvre.
F Press the button in the bottom left-hand
corner of the touch screen.
F Select the type of view:
• "Standard view",
• "180° view",
• "Zoom view",
• "AUTO view".
The display is immediately updated with the
type of view selected.
The state of the system is not kept in memory
when the ignition is switched off.