Toyota RAV4 HYBRID 2016 Manual page 536

536
8-2. Steps to take in an emergency
Warning light
(U.S.A.)
(Canada)
RAV4-HV_OM_OM42A56U_(U)
Warning light/Details/Actions
ABS warning light
Indicates a malfunction in:
• The ABS; or
• The brake assist system
 Have the vehicle inspected by your Toyota dealer
immediately.
Electric power steering system warning light (warning
buzzer)
Indicates a malfunction in the EPS (Electric Power Steer-
ing) system
 Have the vehicle inspected by your Toyota dealer
immediately.
PCS warning light (if equipped)
When the warning light flashes (and a buzzer sounds):
Indicates a malfunction in the pre-collision system
 Have the vehicle inspected by your Toyota dealer
immediately.
When the warning light flashes (and a buzzer does not
sound):
Indicates that the pre-collision system is temporarily
unavailable, possibly due to either of the following:
• The part of the windshield around the camera sensor
being dirty, fogged up or covered with condensation, ice,
stickers, etc.
 Clear the dirt, fog, condensation, ice, stickers, etc.
(P. 223)
• Camera sensor temperature being outside of its opera-
tional range
 Wait for a while until the area around the camera sen-
sor has cooled down sufficiently.
When the warning light is illuminated:
Either the VSC (Vehicle Stability Control) system or pre-
collision system is disabled or both are disabled.
 To enable the pre-collision system, enable both the
VSC system and pre-collision system. (P. 232)