STODDART Woodson W.HLA1200 Specification, Installation And Operation Manual
Heat lamp assemblies
Hide thumbs
Also See for Woodson W.HLA1200:
Subscribe to Our Youtube Channel
Related Manuals for STODDART Woodson W.HLA1200
Summary of Contents for STODDART Woodson W.HLA1200
- Page 1 Specification, Installation and Operation Manual Heat Lamp Assemblies Models: W.HLA900, W.HLA1200 & W.HLA1500 A guide on the use, care and maintenance of your quality Woodson product Rev: A 08/11/2017...
- Page 2 Page Intentionally Left Blank www.stoddart.com.au Page 1 Due to continuous product research and development, the information contained herein is subject to change without notice.
-
Page 3: Table Of Contents
Warranty Request Form � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14 www.stoddart.com.au... -
Page 4: Introduction
Your New Woodson Product Thank you for choosing this quality Stoddart Woodson product� All our products are designed and made to meet the needs of food service professionals� By using, caring and maintaining your product according to these instructions, your Woodson product should give you many years of reliable service�... -
Page 5: Attention
The manufacturer declines any liability for damages to persons and/or things due and to an improper/wrong and/or unreasonable use of the machine Service • Only specifi cally trained/qualifi ed Technicians (Stoddart, one of our service agents, or a similarly qualifi ed persons) should carry out any and all repairs, maintenance and services www.stoddart.com.au Page 4 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 6: Installation
(if the unit is near any heat sensitive material we suggest you allow additional space) • Please consult national and local standards to ensure that your unit is positioned in accordance with any existing requirement www.stoddart.com.au Page 5 Due to continuous product research and development,... -
Page 7: Electrical Connection
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard� Please contact Stoddart for parts and we will advise how to do this in order to avoid any electrical hazard •... -
Page 8: Specification
0.6kW 0.9kW 0.9kW AMPS 10A plug & lead fitted 10A plug & lead fitted 10A plug & lead fitted W.HLA1500 www.stoddart.com.au Page 7 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 9: W.hla900
Specification W.HLA900 W.HLA1200 1200 www.stoddart.com.au Page 8 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 10: Operation
Re-install the lamp shield bars then place the end capping into position and secure with the retaining screw Lamp Shield Bars Bulb End Capping Retaining Screw Socket www.stoddart.com.au Page 9 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 11: Cleaning
Wait until the unit has cooled to a safe temperature before undertaking any cleaning or maintenance. Contact with hot surfaces can cause burns and serious injury. www.stoddart.com.au Page 10 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 12: Cleaning Schedule
Arrange a qualified Technician to repair the power Power Point is faulty point Bulb not turning on Bulb faulty replace bulb www.stoddart.com.au Page 11 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 13: Warranty
Proper maintenance and cleaning of equipment in accordance with the Instructions is essential to the equipment’s effective operation; vii� On site warranty services are limited to sites within 50km from the nearest Stoddart authorised service agent and service agent’s reasonable travel costs must be paid by Customer prior to the commencement of the repairs;... -
Page 14: 4� Warranty Claim Procedure
Transportation costs associated with transporting the equipment to a Stoddart authorized service agent where Stoddart considers (acting reasonably) that repairs cannot be undertaken on-site; and Unless agreed to by Stoddart in writing to the contrary, warranty is not included in the sale price for goods sold to or installed in an overseas location� 4. Warranty Claim Procedure 4�1... -
Page 15: Warranty Request Form
To ensure we can provide the best possible service we require you to complete this form. Make, model and serial number, along with other essential information. To secure a call, you must also have an account with Stoddart or complete the credit card details below. - Page 16 Stoddart Sales Servicing and Replacement Sales Department Tel: 1300 791 954 Fax: (07) 3344 1000 Email: fseorders@stoddart�com�au Service & Spares Department Tel: 1300 307 289 Email: service@stoddart�com�au Email: spares@stoddart�com�au...
Need help?
Do you have a question about the Woodson W.HLA1200 and is the answer not in the manual?
Questions and answers