U-Line U-3036BVWCS-00B User Manual & Service Manual page 66

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Press to select "Re-Select Model".
2. Press .
To change model setting
3. Press to select "Model=" and press
begin to flash.
4. Press or to scroll through each available model.
5. Press to confirm. While processing, the
momentarily change to
To exit Re-Select Model, press
Menu" and press to confirm. (Power cycling unit is
recommended after re-selecting model.)
Factory Wi Fi
Up
Down
The Factory Wi-Fi option is only used in manufacturing
and should always be OFF.
1. Press to select "Factory Wi Fi".
2. Press .
3. Press or select "OFF".
To exit the Factory Wi Fi menu press
to Menu" and press to confirm outputs.
. "Model" will
will
*
.
to select "Return to
Select
RETURN TO MENU
FACTORY WiFi
OFF
to select "Return
Set Points
Up
Down
The Set points menu contains options to modify both the
Zone and Evap set points. Changes to the zone set point
will be reflected on the main screen. Changes to the evap
set point alter the temperature the evaporator needs to
meet during a defrost cycle.
To access Set Points
1. Press to select "Set Points".
2. Press .
3. Press and to scroll through available set points.
To change set points
4. Press , the selected set point will begin to flash.
5. Press or to modify the value.
6. Press to confirm setting.
To exit the Set Points menu, press
Menu" and press to confirm.
Fan Delay (excludes ZWC)
Up
Down
66
Select
RETURN TO MENU
SET POINTS
ZONE = 3°C
EVAP = 5°C
to select "Return to
Select
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
Control Operation - Service 7