Table of Contents
Advertisement
If the engine or transmission is not at normal
operating temperature, the multifunction display
will show temperature
2
or
3
in blue. Avoid
using the full engine power output during this
time.
Engine data (example)
1
Current power output
2
Current torque
When current power output
1
or current torque
2
reaches the maximum value, the digital value
will briefly be stationary. The bar display will
continue.
SETUP in Mercedes-AMG vehicles (example)
1
Drive system setting:
Reduced/Moderate/Sport/Dynamic
2
Transmission position:
D/M
3
AMG DYNAMICS:
Basic/Advanced
4
Suspension tuning:
Comfort/Sport/Sport+
Instrument Display and on-board computer
G-meter (example)
While the vehicle is in motion, the G-meter
shows the forces that are exerted on the vehicle
occupants both laterally and in the direction of
travel. The maximum values are represented by
red markings.
To reset the G-meter: press the left-hand
#
Touch Control.
Select Yes.
#
Press the left-hand Touch Control.
#
23
Advertisement
Table of Contents
