Installation; Trouble Shooting Section - Pyramid CR-82 User Manual

TROUBLE SHOOTING SECTION

1. SIGNAL PROCESSOR DOES NOT TURN ON:
Check all fuses.
Check all power(positive ,remote) wire connections.
Check that ground wire is properly connected.
2. LED POWER ON INDICATOR NOT GOING ON:
Same as sign l remedy.
3. SOUND DISTORTION AT LOW VOLUME LEVEL:
Output level not set correctly.
4. LEVEL OF SOUND IS LOW:
Check input gain control ,match to deck output.
Check the RCA patch cords for loose or misconnected cables.
5. A WHINING SOUND CAN BE HEARD THROUGH THE SPEAKERS
AT LOW VOLUME LEVEL WITH RUNNING ENGINE:
Check the power wire(red)with good connection directly to the battery
and ground point must make good contact with chassis ground.

INSTALLATION

– 7 –