Vcr Setup - LG 50PX1DH Owner's Manual

Hide thumbs Also See for 50PX1DH:
Table of Contents

Advertisement

Installation
3. Analog and Digital TV signals provided on cable and antenna
ANTENNA

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
Connection Option 1
Set VCR output switch to channel 3 or 4 and
then tune the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3. Select the input source with using the
TV/VIDEO button on the remote control. Note
that this TV finds the connected input sources
automatically for Video, Front Video and
Component 1-2. It is presumed that RGB and
HDMI/DVI sources are connected.
Do not connect to both Video and
S-Video at the same time.
14 Plasma TV
Antenna
RF Coaxial Wire (75 ohm)
Cable TV Wall
Jack
RF Coaxial Wire (75 ohm)
Signal
Amplifier
)
PTICAL)
Bronze Wire
Turn clockwise to tighten.
Bronze Wire
• To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
• If the antenna needs to be split for two TV's, install a "2-
Way Signal Splitter" in the connections.
• If the antenna is not installed properly, contact your deal-
er for assistance.
VIDEO
AUDIO
L
COMPONENT INPUT 2
DVD
/DTV
INPUT
AUDIO
RGB INPUT
INPUT
COMPONENT INPUT 1
1
ANT OUT
S-VIDEO
ANT IN
CABLE
ANTENNA
VIDEO
AUDIO
L
R
R
MONITOR OUTPUT
REMOTE
CABLE
ANTENNA
CONTROL
(MONO)
A/V INPUT
S-VIDEO
2
VCR Rear
OUT
(R) AUDIO (L)
VIDEO
OUTPUT
SWITCH
3
4
IN
AC INPUT
AC INPUT

Advertisement

Table of Contents
loading

This manual is also suitable for:

50px1d50px1d-uc50px1dh-uc

Table of Contents