BVE AXS-900TXD Manual

900mhz audio transmitter

Table of Contents

Download this manual

Online Service Manuals available at:

FCC Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help

BroadcastVision Entertainment : www.broadcastvision.com

Tel (888) 330-4283, Email: support@broadcastvision.com

900MHz Audio

Transmitter

Model: AXS-900TXD

www.broadcastvision.com

including interference that may cause undesired operation

Page 1

Table of Contents

Need help?

Do you have a question about the AXS-900TXD and is the answer not in the manual?

Page 1 900MHz Audio Transmitter Model: AXS-900TXD Online Service Manuals available at: www.broadcastvision.com FCC Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:...
Page 2 When the device is not connected properly or the input volume is not sufficient, the left-most decimal point will be illuminated. 2. Input Level Mode – Adjusts the audio level into the AXS-900TXD Transmitter. This mode is indicated by a number 0 – 10 in the display window.
Page 3 2. Adjust the LCD Volume to a mid-range or until the audio broadcast from the LCD provides the best sound quality. The LCD audio level to the AXS-900TXD Transmitter can also be adjusted by pressing the mode button to access the Input Level mode. This mode is indicated by a number 0-10 in the display window.
Page 4 Return Authorizations A Return Authorization number must be issued from BVE prior to any item being returned for credit, repair or exchange. Items returned without approval will be refused and returned to the sender. Requests for a Return Authorization number may be made to our Customer Service Department at 1-888-330-4283.