Advertisement
PWD303 - ADD ON STARTER
OPERATION GUIDE
PWD-303 is easy to use for vehicle equipped with an automatic
transmission. Starting can be achieved by the designated button of alarm
system. Just press the button on transmitter and vehicle will start after 6
sec. and engine keep running for 15 minutes.
To ensure correct and safe remote starting the following must be
observed:
1. Ignition off.
2. Hand brake on.
3. Door and hood closed.
4. Park gear.
5. Brake Pedal released.
Remote engine start procedures:
1. Ignition on.
2. Cranking time 0.75 second or 1.5 second depending on engine and
programming.
3. Lights flash if started successfully.
4. Acc on after 15 seconds of engine running.
Please note:
1. Door and hood can be opened after engine has been remotely started.
2. If remote engine starting fails, system will automatically re-crank up to
5 times, each re-try 0.25 sec will be added to the crank time.
07-08-355-3
Advertisement
