Download Print this page

Tractor Supply AIRBJ20 Instruction Manual

20 ton multi-purpose hydraulic jack

Advertisement

Quick Links

AIRBJ20
20 Ton Multi-Purpose Hydraulic Jack
INSTRUCTION MANUAL
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT OPERATE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, call Customer Service at
1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Advertisement

loading

Summary of Contents for Tractor Supply AIRBJ20

  • Page 1 AIRBJ20 20 Ton Multi-Purpose Hydraulic Jack INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
  • Page 2 Hydraulic Jack Operating Instructions 1. Before operating, estimate the weight of the load. Do not overload the jack beyond its rated load. 2. Select point of action according to the gravitational center. Place the jack on hard ground or place a hard plank under the jack to avoid falling during operations.
  • Page 3: Operation

    This Air Actuated Hydraulic Hand Jack is designed for lifting, but not sustaining, loads ranging from up to 20 tons. It can be used vertically or angled to 5 degrees from vertical position. After lifting, loads must be immediately supported by appropriate means.
  • Page 4: Maintenance

    WARNING THIS IS A LIFTING DEVICE ONLY. IT IS DESIGNED TO LIFT PART OF THE TOTAL VEHICLE (ONE WHEEL AXLE). ALWAYS WEAR SAFETY GLASSES WHEN USING THIS EQUIPMENT. CENTER LOAD ON SADDLE BEFORE LIFTING. NEVER WORK ON, UNDER OR AROUND LOAD UNTIL PROPERLY SUPPORTED.
  • Page 5: Troubleshooting

    TROUBLESHOOTING Symptom Possible Causes Corrective Action Release valve not tightly closed Ensure release valve tightly closed Jack will lift load Overload condition Remedy overload condition Air supply inadequate Ensure adequate air supply Release valve not tightly closed Ensure release valve tightly closed Jack bleeds off after lift Overload condition Remedy overload condition...