Advertisement
IMPORTANT! RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE!
NSTRUCTION MANUAL FOR
TOY RIDE ON CAR MODEL
„GO-GO"
This toy is produced in conformity with the requirements of Toy Safety
Directive 2009/48/EC of the European Parliament and the Council, the regulation
on essential requirements and conformity assessment of toys, the regulation on
conformity marking and the applicable European standards.
Advertisement
Table of Contents
Related Manuals for Chipolino GO-GO
Summary of Contents for Chipolino GO-GO
- Page 1 IMPORTANT! RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! NSTRUCTION MANUAL FOR TOY RIDE ON CAR MODEL „GO-GO“ This toy is produced in conformity with the requirements of Toy Safety Directive 2009/48/EC of the European Parliament and the Council, the regulation on essential requirements and conformity assessment of toys, the regulation on conformity marking and the applicable European standards.
- Page 2 TO GUARANTEE THE SAFE USE OF THIS PRODUCT FOLLOW THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL! IMPORTANT! WARNINGS! • CAUTION! NEVER LEAVE THE CHILD UNATTENDED! CAUTION! THIS TOY HAS NO BRAKE! • • CAUTION! THIS TOY IS NOT SUITABLE FOR CHILDREN UNDER 12 MONTHS AND WEIGHT MORE THAN 25kg.
- Page 3 PRODUCT FEATURES • This toy is intended for a child aged from 12 up to 36 months and weighing up to 25 kg! • When the child is sitting in it, the ride on car can be propelled by the child’s feet. • Steering wheel with horn and music. • Batteries, 2 pcs, type АА/1,5V (LR6). Batteries are not included. MAIN PARTS Backrest Steering wheel Body Wheels ASSEMBLY GUIDELINES AND FUNCTIONS WARNING! FOLLOW EXACTLY THE INSTRUCTIONS AND SEQUENCE FOR ASSEMBLY AND US- ING THE PRODUCT FROM THE BELOW FIGURES. WARNING! CHECK THE SECURITY OF FIXING AFTER PERFORMING ANY OPERATION! Required tools for performing some operations: screwdriver (not included).
- Page 4 ASSEMBLY AND FUNCTIONS 1. ASSEMBLY OF FRONT WHEELS Turn the car upside down. Insert the front and rear axles as shown in the figure. Place the wheels on both sides of the axles and fix them with clamps (joints). Mount with pressure the wheel cover onto each of the wheels. 2. ASSEMBLY OF THE STEERING WHEEL AND BACKREST Insert the steering wheel tube to the steering wheel axle so the holes to match. Fix with a screw using a screwdriver. Place the backrest on the back side of the body. Push the backrest with one hand while holding the body with the other hand until the backrest get fixed. 3. FUNCTIONS To use the functions of the toy, you have to insert batteries: 1 – Unscrew the battery compartment cover by using a screwdriver and remove it. 2 – Remove the cover; 3 – Place 2 pcs batteries type АА/1,5V in the batteries compartment, following the batteries polarity. 4 – Put the cover back and tighten it with a screwdriver. Press the buttons on the steering wheel to hear melodies or horn sound. Фигура 1 Фигура 2 backrest steering rear axle screw wheel front axle...
- Page 5 CARE AND MAINTENANCE INSTRUCTIONS • Regularly check the plastic parts of the ride on car for any cracks or damage. • Regularly oil the moving parts. • Clean the toy by using a damp soft towel or sponge and a mild soap. Do not pour water on the toy. • Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or spirit. • Store the product in a clean and dry place, without moisture and at a safe distance from heat sources! Do not subject to direct environmental effect – sun, rain, moisture or harsh temperature changes! • Do not use the product on muddy, sandy or gravel covered terrains, which can damage the moving parts. • In case of problems related to normal operation, contact authorized service centers for consultation or repair. Used materials: plastic, metal ROCGO0230xxx/616A...
- Page 6 Producer: Produced for Chipolino in PRC Importer: CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA; tel.: +359 32 600 889; www.chipolino.com...
Need help?
Do you have a question about the GO-GO and is the answer not in the manual?
Questions and answers