Gigabyte B760M H User Manual page 19

6) SATA3 4/5/6/7 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel
RAID 1, RAID 5, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website
for instructions on configuring a RAID array.
To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's
website and search for "SATA Configuration" for more information.
7) M2A_CPU/M2P_SB (M.2 Socket 3 Connectors)
The M.2 connectors on the motherboard support only M.2 PCIe SSDs.
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Pull the clip's tab up and out of the mounting hole. Slide the M.2 SSD into the connector at an angle.
Step 2:
Press the M.2 SSD down and then secure it by pressing the clip's tab into the mounting hole.
* Types of M.2 SSDs supported by each M.2 connector:
M2A_CPU
M2P_SB
_ 0
_ F
_ 0 F
_3
_3 U
M.2 PCIe x4 SSD M.2 PCIe x2 SSD
a
a
F
7 7
1 1
U
SATA3
6 7
4 5
80
80
a
a
- 19 -
Chipset supports RAID 0,
®
Pin No. Definition
1
2
3
4
5
6
7
M.2 SATA SSD
r
r
GND
TXP
TXN
GND
RXN
RXP
GND
M2A_CPU
M2P_SB