Canon TR8660 Online Manual page 228

7. Click OK
The printer will now print using these settings.
Important
• When you select Always Print with Current Settings, the settings on the Quick Setup, Main, and
Page Setup tabs are saved, and those settings are used in subsequent printings.
• To register the current settings
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see
To check the current printer settings or to apply the printer settings to the printer driver, display the
Quick Setup tab, click Printer Media Information..., and specify the settings in the dialog box that
appears.
For details about the paper information to be registered on the printer, see the following:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
• When you set Media Type to Premium Fine Art Rough, we recommend that you set Printer Paper
Size to "XXX (Art Paper Margin 35)."
If paper other than "XXX (Art Paper Margin 35)" is selected, an error message may be displayed.
Select one of the page sizes in the displayed dialog box, or go to the Page Setup tab, display the
Print Options dialog box, and change the
setting.
For information about printable ranges, refer to "Print Area."
Checking Printer Settings and Applying Settings to Printer Driver
1. Open printer driver setup window
as a new preset, click Save... under Commonly Used Settings.
Cancel the safety margin regulation for paper size
228
"Paper Settings."