Use; Mount The Power Adapter; Attach The Safety Rope; Attach The Cleaning Cloth - Zoef Robot Bobbie 2.0 Instructions Manual

3. Use

3.1 Mount the power adapter

Power adapter
DC plug (End A)
1. Connect the DC plug to the power adapter
2. Connect the L-shaped plug to the robot and screw on the ring.

3.2 Attach the safety rope

3. Secure the safety rope connector to the robot with a tight
knot.
4. Secure the other end to an indoor point
Remark; Bobbie 2.0 only works when the LED indicator is
green.
3.3 Attach cleaning cloth
Take a cleaning cloth.
5. Spray 5 to 8 times on the top and bottom of the cleaning
cloth.
6. Properly attach the cleaning cloth to the bottom of the
product enclosure, taking care not to block the drive wheel
and drop sensor. The cloth must NOT protrude!
7. If the bottom of the robot has become wet, dry it.
Note: Do not spray water or cleaning liquid on the bottom of the machine or inside the machine.
Note: When installing the cleaning cloth, do not cover the anti-drop sensor on the four corners of the machine with the
cloth, as it may cause the machine to fall or fail to turn at a window frame.
Insert it into the robot
DC connection
Safety Lock
Cleaning cloth