Sort Lists - Gallagher HR5 Instructions Manual

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Sort Lists

A sort list contains a list of animal IDs, each with a sorting
assignment. This assignment may be used to separate animals into
predefined groups, or to flag specific animals for selection.
The Sort Lists screen shows all the sorting lists available on the
reader. These lists are transferred from Animal Performance. Refer
to "Synchronising data" (p. 29) for more
information.
To view a sort list
1. From the Main Menu, select Sort Lists
and press
The sort lists available on the HR5 display.
2. To view the contents of a sort list, select a
list and press
A list of groups that make up the sort list
display.
The group colour displays behind the
group number.
The number of tags scanned into each
group is displayed next to the group
name.
• To view the sorted animal
ID's within a group, select the
group to be viewed and press
• A list of animal IDs (VID or EID as set
in the Tag Display screen) are shown.
3. Press the
the Sort Lists screen and press again to
return to the Main Menu.
Note: The sort list 'Empty List' is the factory default and contains
no animals. This can be used to assign sort groups to each animal
as it is scanned, rather than from a predefined list.
Sort lists are compiled or edited in Animal Performance then
transferred to the reader. Changes made to a list, will be effective
for all sessions that use the list after the change is made.
16
OK
.
OK
.
Return
key once to go back to
OK
.
in