Summary of Contents for logtrec Evo T/RH Series
- Page 1 T/RH Evo Series User Manual Multiple (Single) PDF Temperature (Humidity) Data Logger...
- Page 2 Overview USB Interface LCD Screen LED Indicator Button Internal Sensor...
- Page 3 USB Data Loggers logtrec.®-SD logtrec.®-MT logtrec.®-SDH logtrec.®-MTH Model Type Single use Multiple use Single use Multiple use Temperature & Temperature & Measuing Temperature Temperature Humidity Humidity -30℃~+70℃ -30℃~+70℃ Measuring Range -30℃~+70℃ -30℃~+70℃ 5%RH~95%RH 5%RH~95%RH Digital Temperature and Digitial Temperature Sensor...
-
Page 4: Description And Specifications
Description & Specifications Product Model logtrec.®-MTH Type Multi Use Measures Temperature and Humidity Measurment Range -30°C to +70°C and 0% RH to 100% RH Recording Interval 10 minutes (Standard – can be customized) Temperature Accuracy ±0.2°C (-20°C to +40°C), ±0.5°C (others) Humidity Accuracy ±3% RH (typical) -
Page 5: Operation
Note: This logger could not be stopped by pressing button before at least two readings after recording begins. 5.Download Data Connect the data logger to your computer via USB Port, wait until logtrec.® Evo storage disk is shown on your... - Page 6 computer, then download without software: A PDF report will generate automatically. Please save the PDF report to your computer for viewing. 6.Re-use the Logger To reuse a stopped logger, please connect it to the computer, and make sure you have saved or exported the data;Next reconfigure the logger by repeating the operation in 2.
-
Page 7: Status Indication
LCD Screen Status Indication... - Page 8 Note Shortly press to switch to different display interface. Before started: The interfaces shown in sequence are respectively-Temperature upper limit interface-Tem perature lower limit interface-Humidity upper limit interface-Humidity lower limit. During recording:The interfaces shown in sequence are respectively -Real Time temperature interface-Real time humidity interface-Max temperature ever recorded (to the time press button)-Min temperature recorded (to the time press button)-Max humidity ever recorded (to the time press button)-Min humidity ever recorded (to the time press button).
- Page 9 2, LCD Page indications (During Recording). A single click on the right button (Start button) allows browsing each LCD Page.
- Page 10 3, LCD Indication After stopped A single click on the right button (Stop button) LCD-LED Indication...
-
Page 11: Battery Replacement
Battery Replacement 1 ) Turn the battery cover counter clockwise and remove it, take out the old battery. ( 2 ) Place a new battery inside with "+" side up. ( 3 ) Turn the battery cover clockwise and tighten it. -
Page 12: Battery Management
Battery Management... - Page 13 Certificate of Verification x 1 Please store your logger at room temperature. If you use the logger for the first time, please use logtrec.® software to synchronize system time and configure parameters. Do not remove the battery if the logger is recording.