Advertisement
Timing Mobile Set
Quick Start Guide
GETTING STARTED
1.
Charge the sensor with a regular USB adapter (5V)
2.
Download the Smart Run app and register your account using a valid e-mail address
3.
To register your Timing Gates, use the app to scan the QR code on the yellow Timing Gate case
4.
Link up your sensor with the app.
After this first linking, the app always automatically reconnects to the sensor.
MEASURE A RUN
1. Make sure the sensor is charged and connected
to the app
2. Place the Timing Gates on the desired positions
3. In the app, select "Mobile Gates" and choose
your planned exercise
4. Put on the TB40 Belt with sensor
Install the Smart Run by Humotion app:
5. Position yourself 1m before the first Timing
Gate
6. Start the run. The timing starts once you pass
the first Timing Gate
7. After passing the final Timing Gate, stand still
for one second
8. Press stop
SmarTracks Timing Mobile Set – Quick Start Guide Digital v001 (February 2022)
Advertisement
Table of Contents
Summary of Contents for SmarTracks Timing Mobile Set
- Page 1 3. In the app, select “Mobile Gates” and choose your planned exercise 7. After passing the final Timing Gate, stand still for one second 4. Put on the TB40 Belt with sensor 8. Press stop SmarTracks Timing Mobile Set – Quick Start Guide Digital v001 (February 2022)
- Page 2 Make sure the sensor is placed in the middle on your lower back. The sensor cap should point left and the T-number should face outward. SmarTracks Timing Mobile Set – Quick Start Guide Digital v001 (February 2022)
- Page 3 If you have any questions, please contact our support team, they are happy to help! Phone 0049 251-590 80 540 E-mail support@smartracks.run Humotion GmbH Heerdestraße 23 48149 Münster Germany www.smartracks.run SmarTracks Timing Mobile Set – Quick Start Guide Digital v001 (February 2022)
Need help?
Do you have a question about the Timing Mobile Set and is the answer not in the manual?
Questions and answers