Position The Appliance; Water Supply And Drain - Veneto CSDW60SS-6 User Manual

INSTALLATION INSTRUCTIONS

Position The Appliance

Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with
water supply and drain hoses that can be positioned either to the right or the left sides to
facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling,
the height of the dishwasher may be altered via
adjustment of the screwing level of the feet. In any
case,the appliance should not be inclined more
than 2°.
NOTE:
Only apply to the free standing dishwasher.

Water Supply and drain

Cold water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it
is fastened tightly in place. If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that the water is clear. This
precaution is needed to avoid the risk of the water inlet to be blocked and damage the
appliance.
NOTE:
Please close the hydrant after using.
Page 9 CSDW60SS-6 User Manual