Subscribe to Our Youtube Channel
Summary of Contents for SUPERNOVA VK-1968
- Page 1 © 2022 Order #XXXXX VK-1968 Single-Sided Lightbox Top View Perspective View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
- Page 2 © 2022 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly.
- Page 3 © 2022 Order #XXXXX CEI110 Frame Assembly Disassembly Slide both connectors across seam of extrusions. Tighten all knobs. Straight Connection 1) Loosen all knobs. Straight Connector When assembling frame, first attach all straight 2) Slide connectors off of one extrusion. connectors, then attach corner connectors.
- Page 4 © 2022 Order #XXXXX SEG Installation Graphic Removal Corner A Corner B Corner D Corner C Step 1 Step 2 Step 3 It is important to first insert To remove the graphic from Insert corner A. Turn edge of Repeat Step 1 for opposite Once all corners are inserted, graphic into each alternate the frame, locate the fabric...
- Page 5 © 2022 Order #XXXXX Case Packing Top View of Each Level Graphics Level 1 Level 2 (Bottom level) Case 1 of 2...
- Page 6 © 2022 Order #XXXXX Case Packing Top View of Each Level Setup Hardware Level 1 Level 2 (Bottom level) Case 2 of 2...
- Page 7 CEI-110 horizontal. Z45 Attachment detail. 4) Connect Base Plates [2] to horizontals [2,4], using bolts. 5) Attach power cords to Supernova lights as shown. 6) Apply SEG Graphics to assembled frame. Refer to the SEG Installation general information page. to power...
Need help?
Do you have a question about the VK-1968 and is the answer not in the manual?
Questions and answers