Husqvarna TS 146XK Operator's Manual
Husqvarna TS 146XK Operator's Manual

Husqvarna TS 146XK Operator's Manual

Hide thumbs Also See for TS 146XK:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Operator's Manual
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Manual de Operario
Esta máquina puede utilizar gasolina con un con-
tenido de hasta el 10% de etanol (E10). El uso de una
TS 146XK
gasolina que supere el 10% de etanol (E10) anulará la
garantía del producto.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
114 26 28-49
Por favor lea cuidadosamente y comprenda
English/Spanish
estas intrucciones antes de usar esta maquina.

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Husqvarna TS 146XK

  • Page 1 Manual de Operario Esta máquina puede utilizar gasolina con un con- tenido de hasta el 10% de etanol (E10). El uso de una TS 146XK gasolina que supere el 10% de etanol (E10) anulará la garantía del producto. Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Before and while backing, look behind and down for small WARNING: In order to prevent ac ci den tal children.
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION • Never remove gas cap or add fuel with the engine running. • Allow engine to cool before refueling. WARNING! When loading or unloading • Never fuel the machine indoors. this machine, do not exceed the maximum •...
  • Page 4: Table Of Contents

    SUPPORT / HELP If you require assistance or have questions concerning the application, operation, maintenance or parts for your product: • Visit our website: www.husqvarna.com • Call Us Toll Free: 1-800-487-5951 TABLE OF CONTENTS SAFETY RULES ............2-3 MAINTENANCE .............
  • Page 5: Assembly

    UNASSEMBLED PARTS Keys Slope Sheet Battery (1) Oil Drain Tube (2) Hex Bolts (2) Nut Keps *Installed by Dealer (1) Quick Key(s) Connect *Brush Guard Kit ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY •...
  • Page 6 ASSEMBLY ✓ NOTE: You may now roll your tractor off the skid. Continue CHECKLIST using the instructions that follow to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WARNING: Before start ing, read, un der stand and fol- WISH TO ENSURE THAT YOU RECEIVE THE BEST low all in struc tions in the Op er a tion section of this man u al.
  • Page 7: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT...
  • Page 8 OPERATION KNOW YOUR TRACTOR READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig.
  • Page 9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 10 OPERATION TO USE CRUISE CONTROL (J) (See Fig. 7) TO ADJUST GAUGE WHEELS (See Fig. 9) The cruise control feature can be used for forward travel Gauge wheels are prop er ly ad just ed when they are slight ly only.
  • Page 11 OPERATION REVERSE OPERATION SYSTEM (ROS) (See TO TRANSPORT (See Fig. 3 &12) Fig. 11) When push ing or tow ing your trac tor, ensure transmission is disengaged by placing freewheel control in free wheel ing Your tractor is equipped with a Reverse Operation System po si tion.
  • Page 12 OPERATION BEFORE STARTING THE ENGINE TO START ENGINE (See Fig. 3) When starting the engine for the fi rst time or if the engine CHECK ENGINE OIL LEVEL has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.
  • Page 13 OPERATION 4. Depress forward drive pedal to full forward position, • Always operate engine at full throttle when mow- hold for fi ve (5) seconds and release pedal. Depress ing to ensure better mowing performance and proper reverse drive pedal to full reverse position, hold for fi ve dis charge of material.
  • Page 14: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling...
  • Page 15: Maintenance

    MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor.
  • Page 16 MAINTENANCE V-BELTS CAUTION: Remove lower dash cover carefully to ensure cover tabs are not broken. Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not • Slide lower dash cover up to release cover tabs from ad just able.
  • Page 17 MAINTENANCE AIR FILTER CLEANING Your engine will not run properly using a dirty air fi lter. Ser- • Clean engine, battery, seat, fi nish, etc. of all foreign vice air cleaner more often under dusty conditions. matter. CLEAN AIR SCREEN •...
  • Page 18 MAINTENANCE DECK WASHOUT PORT (See Fig. 21) Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.
  • Page 19: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Page 20 SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert end of link (E) into hole in front mower bracket CHASSIS - Position hole in arm over pin (B) on outside and secure with washer and retainer spring (J). of tractor chassis and secure with retainer spring.
  • Page 21 SERVICE AND ADJUSTMENTS TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT (See Figs. 30 & 31) IMPORTANT: Deck must be level side-to-side. Ensure tires are properly infl ated to the PSI shown on tires. If tires are over or under infl ated, it may affect the appear- To obtain the best cutting re sults, the mower blades should ance of your lawn and lead you to think the mower is not be adjusted so the front tip is 1/8"...
  • Page 22 SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT BELT REMOVAL - (See Fig. 32) • Remove mower. (See “TO REMOVE MOWER” section in this manual.) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. NOTE: Observe entire motion drive belt and position of all belt guides and keepers.
  • Page 23 SERVICE AND ADJUSTMENTS TO REMOVE WHEEL (See Fig. 34) TO REMOVE CABLES, REVERSE ORDER - • BLACK cable fi rst from chassis and then from the fully • Block up axle securely. charged battery. • Remove axle cover, retaining ring and washers to allow •...
  • Page 24 SERVICE AND ADJUSTMENTS TRANSMISSION TO REPLACE HEADLIGHT BULB • Raise hood. REMOVAL/RE PLACE MENT • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely Should your transmission require removal for service or back into the hole in the backside of the grill.
  • Page 25: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Page 26: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine fl ooded. 2. Wait several minutes before attempting to start. 3. Bad spark plug. 3. Replace spark plug. 4. Dirty air fi lter. 4.
  • Page 27 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ run when operator department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.
  • Page 29: Español

    REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Page 30 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles • Mantener la máquina libre de hierba, hojas u otros es- • Apagar todos los cigarrillos, cigarros, pipas y otras fuentes combros que pueden tocar el tubo de escape / partes del de ignición.
  • Page 31: Especificaciones Del Producto

    SOPORTE/AYUDA Si necesita asistencia o tiene alguna pregunta acerca de la aplicación, operación, mantenimiento o piezas de su producto: • Visite nuestro sitio web: www.husqvarna.com • Llámenos de manera gratuita al: 1-800-487-5951 TABLA DE MATERIAS REGLAS DE SEGURIDAD ........29-30...
  • Page 32: Montaje

    PEDAZOS PARA LA MONTAJE Batería Hoja de pendiente Llaves (1) Tubo de desagüe (2) Perno (2) Tuerca Llaves *Instalado por el distribuidor *Juego de cubierta (1) Accesorio del conexión MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío. HERRAMIENTAS NECESARIAS PARA EL •...
  • Page 33 MONTAJE ✓ AVISO: Ahora puede sacar el tractor de la tarima. Continúe usando las instrucciones que siguen para retirar el tractor de la tarima. LISTA DE REVISIÓN ADVERTENCIA: Antes de empezar, leer, entender y seguir ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR todas las instrucciones presentes en la sección Operaciones NUEVO, LE DESEAMOS QUE RECIBA EL MEJOR RENDIMIENTO Y LA MAYOR SATISFACCION DE ESTE...
  • Page 34: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus sig- nifi cados. MARCHA NEUTRO ALTO BAJO ESTRANGU- RÁPIDO LENTO INTERRUPTOR ATRÁS LACIÓN DE IGNICIÓN MOTOR MOTOR MOTOR EL CIERRE PEDAL DE FRENO DE ALTURA...
  • Page 35 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DE OPERARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Fig.
  • Page 36 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Page 37 OPERACIÓN UTILIZAR EL MANDO CRUCERO (Vea Fig. 7) PARA AJUSTAR LAS RUEDAS CALIBRADORAS (Vea Fig. 9) El mando crucero se puede utilizar sólo durante la marcha hacia adelante. Las ruedas calibradoras están bien ajustadas cuando se encuentran un poco a distancia del terreno al mismo tiempo que la segadora esté a la altura de corte deseada.
  • Page 38 OPERACIÓN FUNCIONAMIENTO ATRÁS (ROS) (Vea Fig. 11) PARA TRANSPORTAR (Vea Fig. 3 y 12) Cuando empuje o arrastre su tractor asegúrese de desenganchar Tu tractor está equipado con el Sistema de Funcionamiento Atrás la transmisión poniendo el control de la rueda libre en la posición (ROS).
  • Page 39 OPERACIÓN ANTES DE HACER ARRANCAR EL MOTOR PARA HACER ARRANCAR EL MOTOR (Vea Fig. 3) REVISE EL NIVEL DE ACEITE DEL MOTOR Cuando arranque el motor por primera vez o si al motor se le ha El motor de su tractor se envía de fábrica ya lleno con aceite de agotado el combustible, se necesitará...
  • Page 40 OPERACIÓN • Siempre opere el motor con una aceleración completa cuan do PRECAUCIÓN: En el transcurso del paso 4, siegue para asegurarse de conseguir un mejor ren di mien- puede que de pronto se pongan en movimiento to y una descarga apropiada de los materiales. Regule la las ruedas.
  • Page 41: Programa De Mantenimiento

    MANTENIMENTO ANTES CADA CADA CADA CADA CADA ALMACEN- PROGRAMA DE MANTENIMIENTO DE CADA TEMP- AMIENTO HORAS HORAS HORAS HORAS ORADA Revisar la operación del freno Revisar la presión de las llantas Verificar la sistemas presencia del operador y sistemas "ROS" Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación...
  • Page 42 MANTENIMENTO TRACTOR PRECAUCIÓN: Usar solamente la hojas de repues- Siempre observe las reglas de seguridad cuando dé mante ni- to aprobada por el fabricante de su cortacésped. mien to. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su OPERACIÓN DEL FRENO cortacésped y anular su garantía.
  • Page 43 MANTENIMENTO CORREAS V PRECAUCIÓN: Retirar la cubierta del tablero inferior con cuidado para que no se rompan las lengüetas de la cubierta. Revise las correas V para verifi car si existe deterioro y desgaste • Deslizar la cubierta del tablero inferior hacia arriba para después de 100 horas de operación y cámbielas si es necesario.
  • Page 44 MANTENIMENTO FILTRO DEL AIRE LIMPIEZA Su motor puede sufrir averías y funcionar de manera incorrecta • Limpie todo material extraño del motor, la batería, el asiento, con un fi ltro del aire sucio. Déle servicio al fi ltro de aire más a el pulido, etc.
  • Page 45 MANTENIMENTO PUERTO DE LAVADO DE LA CUBIERTA (Vea Fig. 21) La plataforma del tractor está equipada con un puerto de lavado como parte del sistema de lavado de la plataforma. Se debe utilizar después de cada uso. Lleve el tractor a un lugar horizontal y despejado de su césped, lo bastante cerca de una boca de riego como para que llegue la manguera del jardín.
  • Page 46: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA: PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: • Presione el pedal de freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posición "DESENGANCHADO". •...
  • Page 47 SERVICIO Y AJUSTES • FIJE LOS BRAZOS DE SUSPENSIÓN LATERALES DE • Meta el fi n de la conexión (E) en el hoyo en el suporte anterior LA CORTADORA (A) AL CHASIS - Ubique el orifi cio del de orifi cio y conecte con arandela e Retén del resorte (J). brazo encima de la clavija (B) que hay en la parte exterior del chasis del tractor, y fíjelo con una resorte de contención.
  • Page 48 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA AJUSTE DE DELANTE A ATRÁS (Vea Fig. 30 y 31) Asegúrese de que los neumáticos estén infl ados a la PSI que se IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. indica en estos.
  • Page 49 SERVICIO Y AJUSTES PARA CAMBIAR LA CORREA DE LA CUCHIL- PARA CAMBIAR LA CORREA DE IMPULSIÓN DE MOVIMIENTO (Vea Fig. 33) LA DE LA SEGADORA (Vea Fig. 32) Estacione el tractor en una superfi cie nivelada. Ponga el freno La correa de la cuchilla de la segadora se puede cambiar sin de mano.
  • Page 50 SERVICIO Y AJUSTES PARA REMOVER LAS RUEDAS (Vea Fig. 34) • Conecte el otro extremo del cable (D) NEGRO con un buena CONEXIÓN A TIERRA DEL CHASIS, alejado del estanque • Bloquee el eje en forma segura. de combustible y de la batería. •...
  • Page 51 SERVICIO Y AJUSTES TRANSMISIÓN PARA CAMBIAR LA BOMBILLA DE LA LUZ DELANTERA REMOCIÓN/REEMPLAZO DE LA TRANSMISIÓN • Levante el capota. Si por acaso su transmisión debe ser removida para servicio o • Tire el sujetador de la bombilla fuera del agujero en la parte reemplazo, debe ser purgada después de la reinstalación y antes trasera del enrejado.
  • Page 52: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al fi nal de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edifi...
  • Page 53: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala. Cambie la bujía. Filtro de aire sucio. Limpie/cambie el fi ltro de aire. Filtro de combustible sucio. Cambie el fi...
  • Page 54 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si operador –seguridad fallado. no están correctas, pongase en contacto con un centro funcionando cuando de servicio cualifi cado. el operador se baja del asiento con el PRECAUCIÓN: NO opere la máquina sino hasta haber...
  • Page 56 01.26.21 CL Printed in U.S.A.

Table of Contents