Related Manuals for AccuTools BluVac LTE
Summary of Contents for AccuTools BluVac LTE
- Page 1 BluVac LTE Digital Vacuum Gauge User’s Guide AccuTools ® is a registered trademark of Core Enterprises, Inc. P/N 10527-01 Rev. B...
-
Page 2: Specifications
Weight: 6 oz. (170g) including Battery and Swivel Hook Dimensions: 3.5” x 3” x 1.25” (9cm x 7.5cm x 3cm) WARNING: To avoid personal injury and to prevent damage to the BluVac LTE Digital Vacuum Gauge, never exceed 500 PSI. -
Page 3: Parts Diagram
BluVac LTE User’s Guide Parts Diagram... -
Page 4: Lcd Display
BluVac LTE User’s Guide LCD Display Item Function Main Numeric Display Alternate Numeric Display “Analog” Vacuum Level Bar Graph Backlight Indicator. Flashing: Temporary, Solid: Always On Sound Indicator Battery Level Indicator Oil Sensor Indicator Calibration Mode Indicator Indicates that Temperature is Displayed on the Alternate Numeric Display (during... -
Page 5: Quick Start
25,000 Microns. Select the desired units by repeatedly pressing Attach the BluVac LTE to the system to be evacuated with a high quality vacuum hose. Start the vacuum pump. Read the vacuum level from the Main Display. Turn the power off by pressing and holding WARNING: To avoid damaging the BluVac, only hand-tighten sensor connection. -
Page 6: Battery Installation And Replacement
Mode by pressing any key on the keypad. While in Sleep, the gauge will beep twice every 5 minutes to remind you that it is on. The BluVac LTE will not sleep in the Calibration Mode (see the Calibration section below). -
Page 7: Oil Sensor
Over time, oil vapor and other materials may contaminate the sensor. The BluVac LTE has a built in Oil Sensor that will detect this condition. If the OIL indicator on the display illuminates, this is an indication that the vacuum sensor has been contaminated and is no longer functioning accurately. -
Page 8: Maintenance
Sound The BluVac LTE has an internal speaker that will emit a beep for each valid key press, and also functions as an alarm in the Calibration mode (see the Calibration section below). It will also beep every 5 minutes in Sleep Mode. -
Page 9: Calibration Test
Place the bagged BluVac LTE into a freezer with a temperature of less than –5°C (23°F). Allow the BluVac LTE to cool to below -2°C (28.4°F). At this point, the alarm will sound and the display will change to Remove from freezer and press any key to silence the alarm. -
Page 10: Restoring Factory Calibration
Main Numeric Display. If not, turn the power off again and repeat. Press five times followed by The gauge will beep 5 times and return to normal operation. The BluVac LTE is now reset to the original factory calibration. Low Temperature Operation The BluVac LTE can operate accurately at temperatures as low as 10°F (-12°C). -
Page 11: Frequently Asked Questions
Q. I’ve attached the BluVac LTE directly to my pump with a short hose or coupler. As soon as I blank off the pump, the indicated pressure rises rapidly. Is the BluVac sensor leaking? A. - Page 12 Q. I am still having problems using the BluVac LTE and/or understanding the readings it is giving me. What should I do? A. Please, contact us! Use our website at www.accutools.com or call us at (954) 227-0781 between...