Advertisement

Quick Links

ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged in any
way, it must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Use only the supplied
power cords and always maintain the side grounded contacts. Make sure that the sockets
used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
DANGER! (Hearing damage)
Professional speaker systems are able to generate harmful sound levels. Even the influence
of seemingly harmless sound levels over a longer period of time can lead to permanent
damage to the hearing (from approx. 95 dBA SPL).
Therefore, always wear professional hearing protection (earplugs or capsule ear protectors)
during operation!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-Drum AMP AP-30X and is the answer not in the manual?

Questions and answers

Summary of Contents for FAME E-Drum AMP AP-30X

  • Page 1 ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
  • Page 2 ENGLISH Hint! (Operating conditions) In advance, it must be clarified with the manufacturer whether the device is also suitable for outdoor use. Always keep a minimum distance of 20 cm from walls or other structural objects. Never expose the device to direct rain, moisture or liquids, as this can lead to damage. Vibrations, dust or sunlight can also cause damage, avoid them! Hint! (Power supply) It is essential that you check that the device voltage matches your local mains voltage.
  • Page 3 ENGLISH Symbols on device and packaging: The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock. The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual. The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer's recommendations or with cables installed by qualified personnel.
  • Page 4: Installation

    ENGLISH Installation: Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use. During assembly, suitable protective equipment (in particular head protection, gloves and safety shoes) must be worn and only suitable climbing aids (ladders, scaffolding, etc.) must be used.
  • Page 5: Scope Of Delivery

    Intended use: The product FAME AP-30X E-Drum AMP was designed for use as an amplifier for electric drums. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
  • Page 6: Connections And Controls

    ENGLISH Set up: All connections of the device should be made before switching on. Only use high-quality and undamaged cables that are as short as possible for the connections. Connections and controls: Front panel: TREBLE BLUETOOTH POWER ON/OFF DRUMS DRUMS DRUMS BASS Rear panel:...
  • Page 7 ENGLISH Designation Designation Drum Sound Input  Signal Drum Bass  Knob to control low input from electronic drums (6,35 frequencies level mm gauge jack) Drum Sound Input  Signal Drum Treble  Knob to control high input from electronic drums (3,5 frequencies level mm gauge jack) AUX Sound Input ...
  • Page 8 ENGLISH Connecting the Drum Sound Input: (The graphs are for general illustration only and may vary slightly depending on the monitor.) Connect the digital drum source to the drum sound input (1 / 2) of the monitor with an audio cable (jack 6.35 mm or jack 3.5 mm) when the amplifier is off.
  • Page 9: Technical Data

    ENGLISH Technical data: Model AP-30X E-Drum AMP 30 Watt Power AC 220 V ~ 50 Hz // 110 V ~ 60 Hz Power supply (please notice details on the of label of AC Power Socket) Power consumption ≤ 80 Watt Speaker specifications 10 inch, 70 Watt coaxial speaker with hight pitch Dimensions AMP...
  • Page 10: Environmental Protection

    ENGLISH Cleaning: The ventilation grilles of the unit must be cleaned regularly from impurities such as dust and dirt. Switch off the unit before cleaning and disconnect mains operated units from the mains supply. Use a lint-free, damp cloth for cleaning. Never use alcohol or solvents for cleaning! Do not open the device.
  • Page 11 ENGLISH Notes MS ID: DRU0041686-000 10/2022...

Table of Contents