Assembly – Dual SIM
Your device only supports nano SIM cards. Dual SIM devices support the use of
either two nano SIM cards or a nano SIM card and a memory card.
Dual SIM devices are not available in all markets or from all operators.
For information on how to check if your device is Single SIM or Dual SIM, see
Finding the IMEI number(s) of your device on page 15.
To prevent data loss, make sure you turn off your device or unmount the memory card
before you drag out the holder to remove the nano SIM card (or cards) or memory card from
the device.
To insert either two nano SIM cards or a nano SIM card and a memory card
Do not cut your SIM card, as this may damage your device.
1
Drag out the SIM card tray.
2
Place the main SIM card securely in position for SIM1, as shown in the
illustration.
3
Place either the second SIM card or the memory card securely in the tray, in
the correct orientation as shown in the illustration.
4
Gently push the SIM card tray back into the slot until it fits into place.
Screen protection
Before using your device, remove all protection films to enable full functionality.
Screen covers and protectors may help you protect your device against damage.
We recommend you use only those screen covers intended for your Xperia device.
The use of third party screen protection accessories may prevent your device from
working correctly by covering sensors, lenses, speakers, or microphones and can
invalidate the warranty.
Starting your device for the first time
It is recommended that you charge the battery for at least 30 minutes before
starting up your device for the first time. You can still use your device while it is
charging. For more information on charging, see
page 33.
This is an internet version of this publication. © Print only for private use.
Charging your device on
9