Encrypted magnetic read head, spi interface with fpc (64 pages)
Summary of Contents for IDTECH uSign 300
Page 1
USER MANUAL uSign™ Signature Capture Module Model uSign 300 80109504-001 02-28-2012...
Page 2
300 User Manual FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 3
300 User Manual LIMITED WARRANTY ID TECH warrants to the original purchaser for a period of 12 months from the date of invoice that this product is in good working order and free from defects in material and workmanship under normal use and service. ID TECH’s obligation under this warranty is...
300 User Manual Introduction The use of electronically captured signatures has become common for Point of Service (POS) applications. Electronic signature capture reduces transaction time, eliminates sorting & sending paper, provides convenient electronic storage & transmission, and gives legal accountability (non-repudiation) for POS transactions.
A metal mounting bracket with keyhole & screw mounting is mounted to the back of the housing. The uSign 300 with an RS232 interface uses a standard DE9 connector and uses a 5VDC power adaptor. The input voltage on the power adaptors may be limited; do not exceed the input voltage rating of the power adaptor.
300 User Manual RS232 Communication Interface The uSign has a communication cable with a DB25 (100 Model) or DB-9 (200 Model) connector that fits the computer serial (RS232) COM port connection. See the Specifications, Interface Section for COM port settings.
300 User Manual Communication interface RS232 Baud rates 1200 to 115200 Default 9600 baud, data bits – 8, Parity – none, Stop bit – 1 2.0 Full Speed (HID) Two individual LEDs (green & red) Signature Pad or Host controlled Agency Approvals FCC Class B, &...