Download Print this page

ZACHVO ZA-WPH-1 Instruction Manual

110-120v 1500w

Advertisement

Quick Links

ZACHVO®
INSTRUCTION MANUAL
Model no.: ZA-WPH-1
110-120V 1500W
E-Mail:Service@ltmate.com
ASSEMBLE & OPERATION INSTRUCTION
Please read carefully and Save this instruction for future reference

Advertisement

loading

Summary of Contents for ZACHVO ZA-WPH-1

  • Page 1 ZACHVO® INSTRUCTION MANUAL Model no.: ZA-WPH-1 110-120V 1500W E-Mail:Service@ltmate.com ASSEMBLE & OPERATION INSTRUCTION Please read carefully and Save this instruction for future reference...
  • Page 2 Introduction The infrared heater contains an gold halogen lamp formed reflector heating system that provides even heat distribution. The infrared heater saves 30%-40% of electricity in comparison to traditional heaters. The infrared heater is commonly used for indoor or outdoor spot heating. Perfect for garages, outdoor patios, indoor pools or workshops. Warning READ CAREFULLY-The infrared heater is designed for safe operation.
  • Page 3 Introduction The halogen heater produce instant and comfortable heat like the sun. These robust and weatherproof heaters are designed for domestic and commercial heating applications within outdoor areas, it is for outdoor use only. Model ZA-WPH-1 Voltage(V) 110-120V AC Wattage(W)
  • Page 4 ASSEMBLY INSTRUCTIONS...
  • Page 5 Tools Needed: * Pencil *Hammer *Level *Screw Driver *Power Drill and drill bits A wall mounting bracket is provide with the heater which has been specifically designed to allow this product to be fitted to a wall or ceiling before drilling the holders for the wall/ceiling is solid and that there are no hidden water pipes or electric wires.The heater must be installed no less than 16’’...
  • Page 6 The heater must be installed at least 1.8 m above the floor...
  • Page 7 REMOTE CONTROL INSTRUCTION OPERATING Product Key Function: 1. Turn ON/OFF the power 2. Press key function: press the button, then press the heat levels (L1-L2-standby - off) Remote Control Function Button Function (Heater On) Function (Heater Off) LEDDisplayon Heater Turns heater on or off Turns heater on to Power setting Level1(50%*power)
  • Page 8: Troubleshooting

    Troubleshooting Check if the power cord is plugged into an electrical outlet, if not, plug in. 2. Check if electricity to the main fuse is working 3.Light display, but no heat: Bulb is damaged. Arrange for replacement bulb with local Dealer...