Choose Your Mounting Location; Install The Mr70 - Cisco Meraki MR70 Installation Manual

Installation Instructions

Choose Your Mounting Location

A good mounting location is important to getting the best performance out of your MR70
access point. Keep the following in mind:
1. The device should have unobstructed line of sight to most coverage areas. For
example, if installing in an office filled with workspaces divided by mid-height
cubicle walls, installing on the ceiling or high on a wall would be ideal.
2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
3. If being used in a mesh deployment, the MR70 should have line of sight to at least
two other Meraki devices. A Cisco Partner can help ensure that your AP
placement is ideal.

Install the MR70

For most mounting scenarios, the MR70 mount cradle provides a quick, simple, and
flexible means of mounting your device. The installation should be done in two steps.
First, install the mount cradle to your selected location. Then, attach the MR70 to the
mount cradle
Mount the MR70
Attach the MR70 to the Mount Cradle
The MR70 attaches to the mount cradle with two tabs on the cradle that insert into the
MR70, and is secured to the cradle using one screw.